8-loop flash alarm controller

porducts list

contact datails

Fujian WIDE PLUS precision instrument co., Ltd

NO.1,Cha shan Road,Mawei Hi-techDevelopment Zone,Fuzhou,China. TEL0086-591-83969717 83975383 FAX0086-591-83969600 Contactor Mr Allan Wu

Larger photo of 8-loop flash alarm controller

8-loop flash alarm controller


company	Fujian WIDE PLUS precision instrument co., Ltd
Update	2011-03-31
Original Region	China
prev 1 2 3 4 5 6 7 8 9 10 next

8-loop flash alarm controller

>>Type spectrum table

8-loop flash alarm controller adopts advanced microprocessor for smart control, and can match use with our any control instrument or other contact control instrument. It can detect simultaneously 8-loop signals. Inputs and mainframe both adopt photoelectric isolation structure.
Alarm input signals are: contact open-circuit alarm, contact closed-circuit alarm, TTL level signals. Alarm output modes are: flash alarm, sound alarm, relay contact output alarm (optional for memory function or not)
It adopts high brightness LED or long-lifetime planar luminotron separate indicate the current condition for every loop. The operational parameters exceeds the control point, the alarm controller will alarm with sound or flash, as well as output alarm signal. Can carry serial communication interface.

Main technical parameters

Input signal	Switched quantity：Uarious independent each other contact signals (On/off) TTL level：Standard TTL level of 0? V, high level alarm
Output signal	switched quantity output: relay control output-On/off (with backlash) Contact capacity: AC 220V/3A; DC24 V/5A (resistive load) communication output: standard serial both-way communication interface communication mode: RS-232C, RS-485 baud rate 300?600 bps (free set up) (only model X803 has communication function)
Characteristics	measuring channel 8-channels (in digital alarm, instrument users can shut any channel which are not using) display modeLED of 0.8 inch high brightness displays the operation state for all channels. Displays all channels operation state by planar luminotron tube Displays LED operation state Alarm modesound alarm: 220 V/8W electric bell (self-provided by users), buzzer (built-in instrument) Flash alarm: flash alarm for current alarm channel. Alarm output Relay contact capacity: AC220V/3A; DC24V/5A (resistive load) Silencing test users self-provide the panel silencing button and external connection silencing test button Parameter set Digital set on gently-touched panel keystroke; permanent storage of parameter set value even after breaking off. Parameters set value can be locked with cipher code